










Andalusian Guitars Marcelo Barbero 1948 Full Size Body (Ebony Fingerboard Model) 2023
Andalusian Guitars Marcelo Barbero 1948 Full Size Body (Ebony Fingerboard Model) 2023
"Andalusian Guitars" aims to produce avant-garde guitars made in Spain.Having mastered the traditional and standard techniques of flamenco guitar makers such as Francisco Simplicio, Marcelo Barbero and Santos Hernández, the team of Andalusian guitar craftsmen creates innovative flamenco guitars that go beyond the standards of Antonio de Torres, who created the prototype of today's classical guitar.
This time, the flagship model "Marcelo Barbero 1948 Full Size Body (Ebony Fingerboard Model)" uses an ebony fingerboard, which is rare for an Andalusian guitar.It is made in 2023.A non-cutaway, all-veneer, full-size model.Katsumi Watanabe also loves the cutaway model.
Although it has orthodox specs such as a string length of 650 mm and a flat fingerboard, it is equipped with a large body and sound portal (a hole opened on the side of the body), which is standard for Andalusian guitars.
The top is made of German spruce, the fingerboard and bridge are made of ebony, the neck is made of flamed ash, and the sides and back are made of tulip wood with an impressive exotic pattern.
Compared to a model with a cutaway, the raw sound is louder because it is a full-sized guitar, and the sound has an airy feel but a clear outline overall, perhaps due to the hardness of the ebony fingerboard.
As a flamenco guitar, it can be used for both solo and accompaniment, and since it does not have a pickup, you can easily attach your favorite one and use it on stage.
Not only the beautiful red-colored body, but also the rosette around the sound hole is decorated with beautiful pearls, and the transparent Golpe plate shows the brand's commitment to looks.
This is a high-end flamenco guitar that is purchased from the official distributor "Spain Guitar Online Shop" and has a sense of security.
Country of origin: Spain (Islas Canarias *Canary Islands)
Surface board: German Spruce veneer (German Spruce)
Back plate & side plate: Tulip wood veneer (Brazilian Tulipwood)
Bridge: Ebony
Fingerboard: Ebony
Fingerboard shape: flat
Neck: Flamed Ash
Nut: Rosewood
Saddle: carbon fiber
Pin winder: machine head
Painting: Matte finish
Color: Red
Golpe board: Yes
Zero fret system: Yes
Number of frets: 19 frets
Pickup: None
[Body characteristics]
Maximum width at the top: 305mm
Width of central waist: 260mm
Maximum width at the bottom: 390mm
・Top (neck heel side): 105mm
・Lower (bottom) 110mm
[Characteristics around the neck]
・String length: 650mm
・Nut width (same as zero fret): 52mm
・12th fret width: 65mm
・Width between 1st and 6th strings on the saddle: 63mm
--------------------------------------------------------------------------------
[Accessories] Original hard case (made in Spain)
[Appearance/Condition] There are minor scratches and dullness of parts.At our shop, we repair bridges and fingerboards, and adjust frets.
[Truss rod] This is a model without a rod.
[Frets] Approximately 70% ~ (Good condition as it has been ground together)
[Neck] Straight
[Nut width] Approx. 51mm
[String height] 1st string: approx. 1.8mm / 6th string: approx. 1.9mm on 12F
--------------------------------------------------------------------------------
・If there is any chatter, clogging, or other problems that significantly interfere with the performance, we will make a note of it.If there is no such description, we have determined that there is no problem with the playing condition.
・If there is no mention of "original" or "replacement," we cannot make any determinations regarding the specifications or condition.
- Regarding truss rods, from the perspective of product protection, we only check the tightening and loosening directions up to about 45 degrees.(If it says "with a margin", it means there is a margin of 45 degrees in both directions)
・The contents listed are as of the time of listing.There may be changes due to seasonal changes and changes over time.
- Regarding accessories, only those listed in the published photos and on the exhibition page will be included.
・As we are also selling at the same time at the store, there may be cases where the item is currently on sale or under negotiation.
・We are unable to accommodate requests for specific product delivery times.
--------------------------------------------------------------------------------
・If you have any other questions or would like to try out a sample, please use the inquiry form.
Or please contact our email address ([email protected]).
・Our store's business hours are Fridays, Saturdays, and Sundays (11:00-18:30).
Choose options











Andalusian Guitars Marcelo Barbero 1948 Full Size Body (Ebony Fingerboard Model) 2023
Sale price¥1,045,000 JPY