Fender Japan TL33-M Vintage White

Fender Japan TL33-M Vintage White

1980's Fender Japan Telecaster, "TL33-M" is now in stock!Weight is 3.58kg.

This is a Telecaster with the F serial number "Made in Japan" and was manufactured between 1986 and 1987.Because it is assembled and manufactured by Fujigen, it maintains stable quality and high cost performance, while providing modern performance performance that can be adapted to a variety of styles.

"TL33-M" was a model that supported the lineup at the time as an entry series with modern specifications, leading to the later TL-STD.The standard wood material is a basswood body with a maple neck and 22F maple fingerboard, and the controls are simple with a 3-way selector and 1VOL/1TONE.

The hardware is interesting, such as the distinctive 6-bridge saddle and GOTOH pegs that look typical of this era, but this is one of the earliest Fender Japan instruments that is very popular due to the quality of its instruments.It may have been used quite a bit, and if you enjoy the scratches on the fingerboard and body that are not relics, it would be a good base for a complete remodel to your liking.Please try this opportunity.

--------------------------------------------------------------------------------
[Accessories] Leather soft gig case

[Appearance/Condition] In addition to dull parts, there are signs of use such as scratches, dents on the edges of the body, and dirt on the fingerboard.The knob has been replaced.

[Truss rod] There is plenty of room

[Frets] Approximately 50% ~ (Chattering and resonance overtones can be seen on high frets, so we recommend adjusting them.)

[Neck] Straight

[Nut width] Approx. 42mm
--------------------------------------------------------------------------------
・If there is any chatter, clogging, or other problems that significantly interfere with the performance, we will make a note of it.If there is no such description, we have determined that there is no problem with the playing condition.
・If there is no mention of "original" or "replacement," we cannot make any determinations regarding the specifications or condition.
- Regarding truss rods, from the perspective of product protection, we only check the tightening and loosening directions up to about 45 degrees.(If it says "with a margin", it means there is a margin of 45 degrees in both directions)
・The contents listed are as of the time of listing.There may be changes due to seasonal changes and changes over time.
- Regarding accessories, only those listed in the published photos and on the exhibition page will be included.
・As we are also selling at the same time at the store, there may be cases where the item is currently on sale or under negotiation.
・We are unable to accommodate requests for specific product delivery times.
--------------------------------------------------------------------------------
・If you have any other questions or would like to try out a sample, please use the inquiry form.
Or please contact our email address ([email protected]).
・Our store's business hours are Fridays, Saturdays, and Sundays (11:00-18:30).