Fender Eric Clapton Stratocaster Olympic White 2001

Fender Eric Clapton Stratocaster Olympic White 2001

The guitar that symbolizes Eric Clapton, commonly known as "Blackie".The signature model "Eric Clapton Stratocaster" produced based on this Blackie and released by Fender USA has arrived.The color is Olympic White, it was made in 2001, and it weighs 3.67kg.

Based on a traditional Stratocaster with an alder body and a V-shaped maple neck, this model is packed with Clapton's commitment and continues to be loved all over the world.The pickup is equipped with three ``Vintage Noiseless'' pickups that are familiar to fans.

Furthermore, it is equipped with TBX control and active mid-boost control, allowing you to control everything from delicate and crisp Strat sounds to thick and powerful humbucker-like tones.

Although it has an irresistible look for Clapton fans, it also has a standard sound and modern functions unique to a booster, making it a mysterious piece that makes you think it was already perfected in the 90's or early 2000's.If you are looking for a white Clapton model, this is recommended!

Body: Alder
Body Finish: Gloss Urethane
Bridge: 6-Saddle American Vintage Synchronized Tremolo
Pickups: Vintage Noiseless Single-Coil Strat
Color: Olympic White (OWT)
Control Knobs: White Plastic
Controls : Master Volume, Tone 1. Master TBX Tone Control, Tone 2. Master Active Mid Boost (0-25dB). Mid boost kit
Dimensions : 6.20x17.30x43.30 IN
Fingerboard: Maple
Fingerboard Radius: 9.5" (241 mm)
Fret Size: Vintage-Style
Hardware Finish: Chrome
Neck Finish: Satin Urethane
Neck Material: Maple
Neck Shape: Soft "V"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Pickguard: 1-Ply White
Pickup Switching : 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Position Inlays: Black Dot
Scale Length: 25.5" (64.77 cm)
Special Electronics: Active Electronics
String Nut: Synthetic Bone
Truss Rod Wrench: 1/8" Hex (Allen)
Truss Rods: Standard
Tuning Machines: 6-in-Line American Vintage

--------------------------------------------------------------------------------
[Accessories] Hard case, arm, etc.

[Appearance/Condition] There are signs of use, such as minor scratches and dullness of parts.There are two scratches near the 17th floor of the fingerboard.

[Truss rod] There is plenty of room

[Frets] Approximately 70% ~ (In good playing condition)

[Neck] Straight

[Nut width] Approx. 42mm
--------------------------------------------------------------------------------
・If there is any chatter, clogging, or other problems that significantly interfere with the performance, we will make a note of it.If there is no such description, we have determined that there is no problem with the playing condition.
・If there is no mention of "original" or "replacement," we cannot make any determinations regarding the specifications or condition.
- Regarding truss rods, from the perspective of product protection, we only check the tightening and loosening directions up to about 45 degrees.(If it says "with a margin", it means there is a margin of 45 degrees in both directions)
・The contents listed are as of the time of listing.There may be changes due to seasonal changes and changes over time.
- Regarding accessories, only those listed in the published photos and on the exhibition page will be included.
・As we are also selling at the same time at the store, there may be cases where the item is currently on sale or under negotiation.
・We are unable to accommodate requests for specific product delivery times.
--------------------------------------------------------------------------------
・If you have any other questions or would like to try out a sample, please use the inquiry form.
Or please contact our email address ([email protected]).
・Our store's business hours are Fridays, Saturdays, and Sundays (11:00-18:30).